Labeling Channels - Sansui HDLCD3200B Owner's Manual

CH +/–
Press and release CH+/–. The channel automatically
stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See "Memorizing
channels" on pages 17 and 18.
DISPLAY
Press DISPLAY to display the current information on
the screen.
When the TV receives a digital signal, the digital
information will appear.
Ch 15
Monscope_480i_1
720x480 I 30Hz TV-G
Monscope_480i_1_ABCDEFGHLIJKLMNOPQRST....
ABCDEFGHLIJKLMNOPQRSTUVWXYZabcdefghi....
• Channel number
• Broadcast program name
• Station name
• Program guide
• V-CHIP RATING
When the TV receives a analog signal, the analog
information will appear.
Ch 12 ABCDEFG
No Program Information is Available
720x480 I 30Hz TV-14VSLD SAP
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
Press DISPLAY again to clear the call display.
NOTE:
• When the TV receives an analog signal, DISPLAY
shows only analog information.
• After 4 seconds, DISPLAY screen will return to
normal TV-operation automatically.
RECALL
This button allows you to go back to the last channel
selected by pressing RECALL. Press RECALL again
to return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound
will be silenced and "Mute" will briefly appear on
the screen. The sound can be switched back on by
pressing this button again or the VOL + or –.
SLEEP
The sleep timer allows you to set a time when the
LCD TV automatically switches to standby.
1
Press MENU. The menu screen will appear.
2
Press ▲ or ▼ to select "Feature" menu, then
press ▶.
3
Press ▲ or ▼ to select "Sleep Timer".
4
Press ▶ or ENTER repeatedly to select the
desired sleep time (Off, 15 min, 30 min, 45 min,
60 min, 90 min, 120 min, 180 min or 240 min).
Sleep Timer
Picture
Advanced Video Menu
Password Set
Parental Control
Audio
NTSC CC
ATSC CC
Digital Closed Caption
Setup
Feature To Move Enter
5
Press MENU to return to the normal screen.
NOTE:
• You can also set the sleep timer by pressing SLEEP
on the remote control.
• After the sleep time is programmed, the display
will appear briefly 10 minutes and 5 minutes, 1
minute before to remind you that the sleep timer is
operating.
• To confirm the sleep timer setting, press SLEEP
and the remaining time will be displayed for a few
seconds.
• To cancel the sleep timer, press ▶ or ENTER
repeatedly to select "Off" in step 4.

Labeling channels

Channel labels appear over the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any seven characters to identify
a channel.
To create channel labels
1
Press MENU, then press ▲ or ▼ to select "Setup"
menu, then press ▶.
2
Press ▲ or ▼ to select "Channel Labels", then
press ▶ or ENTER.
The "Channel Labels" menu will appear.
3
Press ▲ or ▼ to select a channel you want to
label.
Channel Labels Menu
Ch 23-0 - - - - - - -
To Move To Change
Enter
4
Press ◀ or ▶ to enter a character in the first
space. Press ▲ or ▼ repeatedly until the
character you want appears on the screen.
240 min
Off
Off
To Select Menu To Exit
Menu To Exit
19