Coherence Fault Between The Lever Position And The Xr25 Display - Renault Clio Workshop Repair Manual

Fiche n 1
Fault finding using bargraph illumination
BARGRAPH 4/5 RH ILLUMINATED:
Ignition off, disconnect the 6 track connector from the computer.
yes
Check the multifunction switch on the 6 track connector on the
computer side using a multimeter or BVI 958. Refer to MR T.A.M.,
Replace the multifunction switch.
AUTOMATIC TRANSMISSION
the lever position and the XR25 display.
Is track C on the wiring side isolated from earth?
Check the insulation of the line between the starter
motor relay and track C of the automatic transmission
Success
"checking the connectors" section.
Are the checks correct?
no
Coherence fault between
computer connector and the insulation of the line
between track C and the injection computer (for
injection versions). Does the fault reappear?
no
23-149
no
yes
yes
Replace the computer.
Erase the memory if the
.
new one is an M 4-3
23
1DMXTT1.0