Usb Hdd / Sd Card Recording - Panasonic Viera ET5A series Operating Instructions Manual

USB HDD / SD Card Recording

You can record the digital TV programmes to the connected USB HDD or inserted SD Card and enjoy playing back in
various ways.
● Analogue TV programme cannot be recorded on the USB HDD / SD Card.
●
The data broadcasting (MHEG, etc.), radio broadcasting and the periods without any signal will not be recorded.
● Not all the programmes can be recorded depending on the broadcaster and service provider.
●
You cannot copy the recorded contents on the USB HDD.
● It is recommended to use the SD Card formatted with this TV
●
For more information of the USB HDD and the SD Card
Caution
●
All data in the USB HDD / SD Card will be erased in the following cases:
When formatting the USB HDD / SD Card with this TV
•
When formatting the USB HDD / SD Card to use on PC, etc.
•
● When the TV is repaired due to a malfunction, you may have to format the USB HDD again with this TV to use it. (All
data will be erased when formatting.)
● In order to use the USB HDD with your PC after recording with this TV, format it again on your PC. (Special
operations or tools may be necessary to format on your PC. For details, read the manual of the USB HDD.)
● The data recorded on the USB HDD / SD Card with this TV can only be played back on this TV. You cannot play back
its contents with another TV (including the TV of the same model number) or any equipment.
● Do not turn the TV off, pull out the mains plug or remove the USB HDD / SD Card during operation (formatting,
recording, etc.). It may cause malfunction of the device or damage the recorded data. (Also when the electric outage
occurs.) It is recommended to back up the data (if any) of the SD Card before using with this TV.
■
Preparation for USB HDD / SD Card
USB HDD
Connect the USB HDD to the USB 1 port with the USB
cable.
● Be sure to connect the USB HDD to the socket outlet.
●
To remove the USB HDD safely from the TV
(p. 21, 57)
●
Check the type of terminals and cable plugs are correct
when connecting.
socket outlet
USB HDD
Gently insert the SD Card with the label surface
Push until a click is heard.
Display the menu and select [Setup]
1
Select [Recording Setup]
2
Recording Setup Access
(p. 94)
SD Card
●
USB cable
facing front.
To remove, push again.
select
Setup
access
select
access
(p. 57)
"Setting for USB HDD / SD Card" (p. 56)
Unlock the write-protection switch (on the left side of the
SD Card) to record and play back.
Cutout
55