Panasonic Viera ET5A series Operating Instructions Manual page 40

Viera et5a, et5z series led tv
Table of Contents

Advertisement

Menu
Item
Connection Test,
Network Connection,
Wireless Network
Settings, IP/DNS
Settings
Network Link Settings
Software Update
New Software Message
Network Status
Timer Programming
Off Timer
Auto Standby
Auto Standby
Eco Navigation
Recording Setup
Child Lock
40
Adjustments / Configurations (alternatives)
Sets the network setting to use in your network environment (p. 73, 74)
Sets to control the TV with the devices connected to the network (p. 72)
Checks for available software updates from the Panasonic website
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Displays the network status (MAC Address, current network settings, etc.)
Sets a timer to record or remind forthcoming programmes (p. 47)
For Digital TV
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 21)
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
Starting Timer Programming automatically does not affect this function.
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.
Automatically sets the TV to the most suitable energy-saving mode
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[On]
[Intelligent Auto Standby]
[Auto Standby]
[2 hours]
Settings for the recording feature of the USB HDD / SD Card (p. 55 - 57)
Applies access control for channels or inputs to prevent unwanted access (p. 50)
[On (No reminder)]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents