Identifying A Video Board On Hp Kayak Xu; And Xa-S Pc Workstations - HP Kayak XA-s 02xx Manual

Identifying a Video Board On HP Kayak XU

and XA-s PC Workstations

How do I identify which video board is installed in an HP Kayak
XU Series 03xx or XA-s Series 02xx PC Workstation?
Check the Support label on the back of the PC (this could be
either on the right or left-hand side of the box).
The last two numbers of the PC Workstation series refer to the installed
video board. For example, on the support label, XU6/XXXserie0301, the
figures 01 refer to the Matrox Millennium II video board.
The graphics controller installed on the HP Kayak XU Series 03xx PC
Workstation could be either a Matrox Millennium II, a Matrox Millennium
G200 or an ELSA GLoria Synergy+™.
The Matrox Millennium II Kayak XU model is labeled:
XU6/XXXserie0301.
The Matrox Millennium G200 Kayak XU model is labeled:
XU6/XXXserie0303.
The ELSA GLoria Synergy+ Kayak XU model is labeled:
XU6/XXXserie0341.
The graphics controller installed on the HP Kayak XA-s Series 02xx PC
Workstation could be either a Matrox Millennium G100, a Matrox Millennium
G200 or an ELSA GLoria Synergy+.
The Matrox Millennium G100 Kayak XA-s model is labeled:
XAS/XXXserie0202, or XA-S6/XXX without series reference.
The Matrox Millennium G200 Kayak XA-s model is labeled:
XAS/XXXserie0203, or XA-S6/XXX without series reference.
The ELSA GLoria Synergy+ Kayak XA-s model is labeled:
XAS/XXXserie0241, or XA-S6/XXX without series reference.
In all of the above models, XXX = processor speed.
Identifying a Video Board On HP Kayak XU and XA-s PC Workstations
27