Casio CFX-9850G PLUS Graph Manual page 3

12-2 Using Graph-to-Table
u u u u u To store graph pointer coordinates in a table
P.5
1. Input the two functions.
2. Press 6 (DRAW) (or w) to draw the
3. Press 1 (Trace) and then use d to move the pointer to the first intersection.
4. Press w to store the coordinates of
5. Use e to move the pointer to the point
• If the Derivative item in the set up screen is set to "On", the derivative at the
location of the trace pointer is also stored in the table.
Example To store the points of intersection and the coordinates for the
following graphs where X = 0:
x
Y1 = 2
Use the following View Window parameters.
Xmin
Xmax = 5
Xscale = 1
graph in the left half of the screen.
the pointer location in the table on the
right side of the screen.
where X = 0 and then press w.
Next, move the pointer to the next
intersection and press w again.
– 3 Y2 = –
= –5 Ymin
Ymax = 10
Yscale =
x y
/ -coordinate value
x
+ 2
= –10
2
177