Test in accordance with EN 50242 must be
carried out when the salt container and rinse
aid dispenser have been filled with salt and
Amount of detergent required
Rinse aid setting
Upper basket
cup racks: position A
Installation
WARNING!
Any electrical and/or plumbing work required to
install this appliance should be carried out by a
qualified electrician and/or plumber or compe-
tent person.
24
Full load: 12 standard place settings
5 g + 25 g (Type B)
position 4 (Type III)
Cutlery basket
rinse aid respectively and using the test pro-
gramme (see "Consumption values").
Lower basket
Water connection
WARNING!
The dishwasher must not be connected to open
water appliances or instantaneous water heat-
ers. This dishwasher may be fed with either hot
(max. 60°) or cold water. Nevertheless we ad-
vise you a cold water supply.