Configuring Your Machine When The Ssid Is Not Broadcast - Brother MFC-J280W User Manual
Multi-protocol on-board ethernet multi-function print server and wireless ethernet multi-function print server
Hide thumbs
Also See for MFC-J280W:
- Manual del usuario (156 pages) ,
- Advanced user's manual (82 pages) ,
- Network user's manual (82 pages)
Table of Contents
Advertisement
Configuring your machine for a wireless network
Configuring your machine when the SSID is not broadcast
For MFC-J425W/J430W/J432W/J435W
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
SSID (Network Name):
Communication Mode
Infrastructure
1
TKIP is supported for WPA-PSK only.
For example:
SSID (Network Name):
HELLO
Communication Mode
Infrastructure
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Setup Wizard.
Press OK.
e
When Enable WLAN? is displayed, press OK to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
Authentication method
Open system
Shared key
WPA/WPA2-PSK
Authentication method
WPA2-PSK
Encryption mode
WEP
NONE
WEP
AES
1
TKIP
Encryption mode
AES
Network key
—
Network key
12345678
3
3
3
26
Hide quick links:
Advertisement
Table of Contents
