Error List - Canon i450 Simplified Manual

ERROR LIST

3.
3.1. Errors by LED Blinking in Orange
User recoverable errors
LED
blinking in Panel display
orange
2 times 301
3 times 302
6 times 402
7 times 403
8 times 202
11 times 611
612
*1:The error code is stored in the operator / service call history of the EEPROM information.
Error Code
1000 No paper.
1300 Paper jam.
1401 The print head is not
installed.
1405 The print head is not
installed
(EEPROM data of the
print head is faulty.)
1700 Warning: The waste ink
absorber becomes almost
full (to approx. 95% to
100% of the maximum
capacity).
2001 Digital
transmission
error (When the printer
cannot communicate with
a digital
time-out error occurs.)
2001 Digital
non-supporting
error (When a digital
camera or device other
than a digital camera, not
supporting Direct Printing
is connected to the printer
with the USB cable, the
error occurs.)
5
Error
Set the paper, and press the
Resume/Cancel button.
Remove the jammed paper, and
press the Resume/Cancel button. If
the error is not resolved, check that
no foreign material is inside the
printer.
Install the print head, and close the
access cover.
Re-install the print head, or with the
properly. print head installed, turn the printer
off and on. If the error is not
resolved, replace the print head.
Pressing the Resume/Cancel button
will exit the error.
(The waste ink absorber full error
occurs at 100% capacity, making it
impossible to perform printing.
camera Disconnect the USB cable to the
time-out digital
Resume/Cancel button.
camera, the
camera Disconnect the USB cable, and press
device the Resume/Cancel button.
Solution
camera, and press the