Service Mode - Canon i450 Simplified Manual

3.2. Errors by LED Blinking in Orange and Green Alternately, or Lit in Orange
User unrecoverable errors
LED
alternate
blinking in Panel display
orange and
green
2 times 802
4 times 804
6 times 806
7 times 807
8 times 808
9 times 809
Lights in No display
orange
*1:The error code is stored in the operator / service call history of the EEPROM information.

Service mode

4.
4.1 Service mode function
Function
Service test print
EEPROM information print
EEPROM initialization
Waste ink counter reset
Destination settings
Print head deep cleaning
Operation panel display
confirmation
Error Code
5100 Carriage error
5C00 Purge unit error
5400 Internal temperature error
5B00 Waste ink absorber full error
5200 Print head temperature rise
error
6800 EEPROM error
6800 RAM error
Procedures
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Operation panel operation
confirmation procedures" below.
Error
1. Check that no foreign material
is inside the printer.
2. Replace the timing slit strip
film.
3. Replace the purge unit.
4. Replace the logic board ass'y.
1. Check that no foreign material
is inside the printer.
2. Replace the purge unit.
3. Replace the logic board ass'y.
1. Turn the printer off, and after a
short period of time, turn the
printer on again.
2. Replace the logic board ass'y.
1. Replace the ink absorber.
2. Replace the logic board ass'y.
1. Turn the printer off, and after a
short period of time, turn the
printer on again.
2. Replace the print head.
3. Replace the logic board ass'y.
Replace the logic board ass'y.
Replace the logic board ass'y.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 9
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 10.
The following items are not initialized:
- USB serial number
- Destination settings (Japan / Overseas)
- Cleaning flag on arrival
- Waste ink counter
Both the main and the borderless print waste
ink counters are reset at the same time.
Overseas: i450
Japan: PIXUS 450i
Cleans black and color, simultaneously.
Confirm the operations of operation panel
display and operation buttons. Perform the
confirmation at operation panel replacement.
6
Solution
Remarks