Canon Satera LBP-3910 User Manual page 44

CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
The multi-purpose tray can be loaded with up to the number of sheets listed below.
•
Make sure that the paper stack does not exceed the load limit guides.
- Plain paper : Approx. 100 sheets (Ex. 64 g/m
- Heavy paper : Approx. 50 sheets (Ex. 128 g/m
- Transparency : Approx. 50 sheets
- Label : Approx. 40 sheets
Load the paper so that it is straight.
•
If the rear edge of the paper stack is not properly aligned, this may result in
•
misfeeds or paper jams.
If the paper is curled or folded at corners, flatten it before loading it in the printer.
•
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
•
once. In this case, fan the paper thoroughly, and then align the edges of the stack
on a hard, flat surface.
When custom size paper is printed from LIPS LX Printer Driver, you can load the
•
paper either in portrait or landscape orientation. However, when you are printing
custom size paper of its long edges 312.0 mm or less with <
> set to <
printing from LIPS LX Printer Driver, load the paper in portrait orientation.
>, load the paper in landscape orientation. When you are not
2
)
2
)
43