Canon Satera LBP-3910 User Manual page 32

- Make sure that the size of the loaded paper matches the paper size specified in the
printer driver. If they do not match, the printer operates as follows depending on the
setting for <
Setting for <
(the default setting)
- When printing custom size paper from LIPS LX Printer Driver, you can load paper either
in portrait or landscape orientation. However, when loading custom size paper of its
long edges 297.0 mm or less, load the paper in landscape orientation. When you are
not printing from LIPS LX Printer Driver, load the paper in portrait orientation.
1
Pull out the paper cassette.
Cassette 1
Pull out the paper cassette gently until it
a .
stops
a
Raise the front side of the paper cassette
and remove it from the printer
b
>.
>
Even if the settings are different from each other, no message
appears, and the printer prints the currently loaded paper.
The message <
printer stops printing. However, a paper jam may occur.
b .
Printer Operation
> appears, and the
Cassette 2, 3, and 4
Pull out the paper cassette gently until it
a .
stops
a
Hold the grips (A) with both hands, raise
the front side of the paper cassette slightly
b
, and then pull it out completely
shown in the figure.
c
b
c
as
(A)
31