Canon Satera LBP-3910 User Manual page 43

5
6
42
Before loading transparencies or labels, fan them in small
batches and align the edges.
Thoroughly fan in small batches
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
Be sure to fan the transparencies or labels thoroughly before loading them. If they
•
are not fanned enough, multiple sheets of paper may be fed at once, causing paper
jams.
When fanning or aligning the transparencies, try to hold the edges to avoid
•
touching the printing surface.
Take care not to mark or stain the printing surface of the transparencies with
•
fingerprints, dust, or oil. This may result in poor print quality.
Gently load the stack of paper with the printing side facing up
until it touches the back of the tray.
Be sure that the paper stack is loaded under the load limit guides (A).
Tap the edges on a flat
surface a few times
(A)