Canon Satera LBP-3910 User Manual page 15

■ Envelope
The envelopes that can be used with this printer are YOUGATA No. 4, YOUGATA No. 2,
and KAKUGATA No. 2 with the following structures only. Load the envelopes with the
address side (non-glued side) facing up in the multi-purpose tray.
YOUGATA No. 4
105 mm 235 mm
* You cannot use envelopes at sizes of YOUGATA No. 4 and
YOUGATA No. 2 that have a flap on the short edge.
IMPORTANT
Do not use the following types of envelopes. Using inappropriate envelopes may result in
•
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
•
and press the fold lines along the edges tight.
Do not print on the reverse side (glued side) of envelopes.
•
When loading envelopes at a size of YOUGATA No. 4 or YOUGATA No. 2, load them so
•
that the flap is toward the left of the printer when viewed from the front.
(
14
: Feeding direction)
YOUGATA No. 2
114 mm 162 mm
KAKUGATA No. 2
240 mm 332 mm
Envelope K-201G for
Canon LBP/recommended