Table of Contents
Advertisement
BJC-8500
3.6.4 Destination setting
The control ROM used on this printer has both the functions of Japanese model (BJ
F8500) and overseas model (BJC-8500). The printer specifications are set by the
device ID stored in EEPROM.
When the EEPROM is initialized, the device ID is set to BJC-8500, and the printer
specifications are set for the overseas model. As this printer is destined for the
overseas market, leave it as it is. For details, see "Part 3: 3.4.2 Service mode" (page 3-
24) .
Check the destination setting in the nozzle check print that is printed out in the
service mode or the user mode.
Make sure that "BJC-8500 Vx.xx" is indicated at the top left of the printed pattern.
When the Japanese version has been set, "BJ F8500 Vx.xx" is indicated.
After initializing the EEPROM, clearing the waste ink level, or setting to
overseas version, be sure to make a self test print in the service mode
( "Part 3: 3.4.2 Service mode" (page 3-24) ) to check the EEPROM data settings.
3-29
Part 3: Operating Instructions
Advertisement
Table of Contents
