BJC-8500
2. MACHINE PRECAUTIONS
2.1 Handling BJ Cartridges
2.1.1 Unpacking BJ cartridges
Do not unpack the BJ cartridges until they are ready to be used. Before installing the
BJ cartridge in the printer, gently remove the cap protecting the nozzles as shown in
Figure 1-6 Removing the Protective Cap .
Black BJ Cartridge
BC-80
Color BJ Cartridge
Figure 1-6 Removing the Protective Cap
Never re-use a protective cap once it has been removed. Re-using a
protective cap may cause defective printing. Also, be sure to use BJ
cartridge container SB-80 for storing BJ cartridges. If the protective cap is
re-attached to the BJ cartridge, the film or tape on the cap may form an
ink path with other inks. This, in turn, may cause inks of different colors
to mix or cause the nozzles to clog.
Part 1: Safety and Precautions
Photo BJ Cartridge
BC-81
Protective Cap
1-5
BC-82 Photo