Table of Contents
Advertisement
Part 1: Safety and Precautions
2.2 Handling the Ink Tanks
2.2.1 Unpacking the ink tanks
Do not unpack the ink tank from its package until it is ready to be used. Before
installing the ink tank in the BJ cartridge, unpack the ink tank and remove the
protective cap protecting the ink outlets.
2.2.2 Protecting the ink tanks
To prevent poor ink suction due to foreign matter on the joints with the BJ cartridge,
never touch the ink outlets of the ink tank with your hands or fingers. After removing
the protective cap from the ink tank, immediately install the ink tank in the BJ
cartridge to prevent the nozzles from clogging due to ink drying. Do not remove ink
tanks from BJ cartridges unless replacing them. (When not using an ink tank, place
them, installed in the BJ cartridge, in BJ cartridge container SB-80.
Ink Outlets
Figure 1-8 Removing the Ink Tank Protective Cap
Figure 1-9 Ink Outlets
1-8
BJC-8500
Advertisement
Table of Contents
