Off-Line Operation; Cleaning Operation; Nozzle Check Pattern Printing - Canon BJC-8200 Photo Service Manual

Part 3: OPERATION

1.5 Off-line Operation

This printer, when powered on (soft power-on), has an off-line operation function that
allows the printer to operate independently of the computer. With the printer powered
on, hold down the RESUME button, confirm the specified number of beeps for the
desired operation, and then release the RESUME button.
Beeps
1
2
3

1.5.1 Cleaning operation

If print output fades or blank lines appear on the output, check if the BJ head nozzles
are clogged by printing the nozzle check pattern. If clogged, clean the cartridge to
remove the stoppage.
With the printer powered on, hold down the RESUME button and, after confirming one
beep, release the RESUME button. The cleaning operation will start. You can also clean
the print head from the computer using the printer driver utilities. (See
After cleaning, check that the nozzles have recovered by printing the nozzle check
pattern again.
The cleaning operation cannot be performed when the scanner cartridge is installed.

1.5.2 Nozzle check pattern printing

With the printer powered on, hold down the RESUME button and, after confirming two
beeps, release the RESUME button. The nozzle check pattern printing will start, feeding
a sheet, which must be of A4 size, from the auto sheet feeder or manual paper feed
slot.
If print defects are detected in the test print, perform BJ cartridge cleaning. If five or
more cleaning operations fail to solve the problem, replace the BJ cartridge with a new
one.
If you start the nozzle check pattern with the scanner cartridge installed, the BJ
Cartridge Mis-installed Error will occur. (See
scanner cartridge with the BJ cartridge, then the nozzle check pattern printing starts
automatically.
CAUTION
NOTE
Operations
Cleaning
Nozzle check pattern printing
No operation
Use paper of A4 size or larger for the nozzle check pattern printing. If you
use smaller paper, the platen may be smeared with ink.
To abort the nozzle check pattern printing, press the POWER button. The
printer will switch off after ejecting the paper.
Remarks
...
Prints one sheet and ends
...
Page 3-2) In this case, if you replace the
3-6
BJC-8200
Page 3-5)