Hints For Test Institutes; Installation - Zanussi ZDI111 User Manual

156997390en.qxp 1/17/2007

Hints for test institutes

Testing in accordance with EN 60704 must be
carried out with appliance fully loaded and
using the test programme (see "Consumption
values").
Amount of detergent required:
Rinse aid setting:
Upper basket

Installation

WARNING!
Any electrical and/or plumbing work required to
install this appliance should be carried out by a
qualified electrician and/or plumber or
competent person.
Water connection
WARNING!
The dishwasher must not be connected to
open water appliances or instantaneous water
heaters. This dishwasher may be fed with cold
water.
18
3:17 PM Page 18
Test in accordance with EN 50242 must be
carried out when the salt container and rinse
aid dispenser have been filled with salt and
rinse aid respectively and using the test
programme (see "Consumption values").
12 standard place settings
Cup racks:
position A
Only use, for connection to the water mains,
new hose-set; old hose-set must not be
reused.
Full load:
5 g + 25 g (Type B)
position 4 (Type III)
Cutlery basket Lower basket
WARNING!