Hard Drive Disassembly - Sony VPCL211FX Replacement Instructions

Step 4. Grasp the Door stand and rotate
up to disengage the Tabs holding the
Door in place. When the Tabs release,
lift the Door straight up to remove.
Step 7. For each Hard Drive Cable,
grasp the Tab on the connector and slide
the Cable away from the Hard Drive to
disconnect. Remove the Hard Drive from
the unit.
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N Rev. B
989202623
VPCL2 Series Hard Disk Drive
Replacement Instructions
Step 5. Using the enclosed magnetic
screwdriver, loosen the four (4) screws
securing the Hard Drive Assembly.
The screws will loosen but not cannot
be completely removed from the Hard
Drive.

Hard Drive Disassembly

(Steps 8-12)
Step 8. Remove the four (4) screws
which secure the Bracket to the Hard
Drive. Lift the Hard Drive Bracket
straight up to remove.
Put the screws aside to secure the
Bracket to the New Hard Dive later in
the procedure.
2/4
Hard Drive Cables
Step 6. Grasping the Hard Drive from
the right side, lift up to expose the
Hard Drive Cables as shown.
Old Hard Drive
Step 9. Set the old Hard Drive aside.