Setup; Sound Customizing; Subwoofer On And Off - Alpine CDE-9845 Owner's Manual

SETUP

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to make your desired settings.
CDE-9845
BAND Rotary encoder
g f
MUTE/SETUP
CDE-9843
BAND Rotary encoder
g f
MUTE/SETUP
CDE-9841
4/3
BAND
g f
MODE MUTE/SETUP
16
-EN
A typical SETUP procedure is shown in steps 1 to 4
as follows. See below for further information about
each SETUP menu.
1
Press and hold MUTE/SETUP for at least 2
seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
(e.g. Select SUBW)
CDE-9845
ILLUMI → DIMMER → SUBW → CDDA / MP3/CDDA →
SCROLL TYPE → SCROLL → AUX IN →
(AUXILIARY/TV/VCR/GAME) → POWER IC → AREA
* 1
DEMO → ILLUMI
1
* Displayed only when AUX IN is ON.
* 2 Refer to "Listening to Radio" (page 6).
CDE-9843
DIM → SUBW → CD-DA / CDDA/MP3 → SCR TYPE → SCR →
PWR → AREA → DIM
* 2
2
* Refer to "Listening to Radio" (page 6).
CDE-9841
SUBW → PWR → SUBW
3
Press BAND to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MUTE/SETUP for at least 2 seconds again.
The display returns to normal mode.

Sound Customizing

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 Press the Rotary encoder (CDE-9845/CDE-9843 only) or
press MODE (CDE-9841 only) repeatedly to select the
SUBW mode.
BASS → TREBLE → SUBWOOFER → BALANCE → FADER →
DEFEAT → VOLUME → BASS
2 To adjust the level, turn the Rotary encoder (CDE-9845/
CDE-9843 only) or press 4 and 3 (CDE-9841 only).
→
* 2