Starting And Driving; Ignition Switch - Mazda MX-5 Miata Owner's Manual

MX-5_8CC1-EA-11F_Edition2 Page158
Monday, July 18 2011 10:8 AM
Driving Your Mazda

Starting and Driving

Ignition Switch

Auxiliary key (with advanced key)
NOTE
When starting the engine using the advanced
key, refer to Starting the Engine (page 3-11).
When starting the engine with the
auxiliary key, perform the following
procedure.
1. Remove the auxiliary key from the
advanced key (page 3-18).
2. Make sure the start knob is in OFF/
LOCK position.
3. Remove the start knob by pulling it
outward while pressing the buttons on
both the left and right sides.
4. Insert the auxiliary key in the ignition
switch.
5-2
Form No.8CC1-EA-11F
Black plate (158,1)
qIgnition Switch Positions
With advanced
key
Without advanced
key
The engraved mark on the actual vehicle
may read OFF or LOCK depending on the
type of ignition system.
OFF/LOCK
The power supply to electrical devices is
turned off. Only in this position can the
key be removed.
Manual Transmission Vehicle
Push the key