Mazda MX-5 Miata Owner's Manual page 259

MX-5_8CC1-EA-11F_Edition2 Page259
Monday, July 18 2011 10:8 AM
UPDATING xx% is displayed when the
SIRIUS channel map is changed. If the
unit is initialized or the user contract
content is changed, UPDATING is
displayed. Updating could take as long as
three minutes depending on the
geographical area. When the unit is in an
initialized state, channel 184 is displayed
after the display indicates
UPDATING 100% . If the SIRIUS
channel map or the user contract content
is changed, the channel prior to the
change is displayed after UPDATING is
displayed. After the initialization display,
it may take as long as 12 seconds to
receive channel 184.
NOTE
Do not perform the following operation while
"UPDATING" is displayed. Otherwise, the
updating procedure will be cancelled.
Turning off the audio power
l
Switching to other modes
l
Switching the ignition off
l
When the SIRIUS mode is switched to
another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Channel selection
Turning the manual tuning dial allows you
to select the desired receiving channel.
Turn the knob clockwise: Channel Up
l
Turn the knob counterclockwise:
l
Channel Down
Unsubscribed channel
When a selected station has not been
subscribed to, the display indicates the
following:
[CALL 888] and [539
(Flashes alternately)
Form No.8CC1-EA-11F
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Invalid channel
When a selected channel is not
broadcasting, [SR
INVALID] is displayed for one second,
followed by [SR
CHANNEL], which is also displayed for
one second. The display then returns to
the previous valid channel.
NOTE
If the last channel selected has become
unavailable because of a channel update the
above indication is displayed until any button
is pressed.
Preset channel programming
(Programming with channel number
display)
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR
number)]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the channel number flashes. Then,
[SR
and a beep sound is heard at the same
time.
3. [SR
(preset number)
are displayed.
SIRI]
Black plate (259,1)
Interior Comfort
Audio System
(bank number)
(bank number)
(bank number) (channel
(bank number)] is displayed
(bank number) CH
(channel number)]
6-37