Mazda MX-5 Miata Owner's Manual page 376

MX-5_8CC1-EA-11F_Edition2 Page376
Monday, July 18 2011 10:9 AM
Maintenance and Care
Owner Maintenance
2. Turn the screws and the center section
of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.
Removal
Installation
3. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.
8-40
Form No.8CC1-EA-11F
Black plate (376,1)
4. Turn the socket and bulb assembly to
remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
NOTE
(Replacing front-passenger side lamp bulb)
Turn the socket and bulb assembly screw
counterclockwise.
6. Install the new bulb in the reverse order
of removal.