[ 2 ] Setting the Battery Terminals P2, +/- Terminals P3 and P1, and + and - Terminal
ASSYs 65
(1) Place the bottom cover upside down.
(2) Set three battery terminals P2 to the bottom cover until they snap into place, as
shown below.
Figure 2.2-13 Setting the Battery Terminals P2
(3) Turn the bottom cover rightside up.
(4) Snap the + terminal ASSY 65 into the bottom cover.
(5) Snap the +/- terminals P3 and P1 into the bottom cover.
(6) Snap the - terminal ASSY 65 into place.
Figure 2.2-14 Setting the +/- Terminals P3 and P1 and the + and - Terminal ASSYs 65
II - 16