Brady SLV-DAT-PRO User Manual page 39

Refer to the documentation for your computer to determine the type of shielded interface
cable needed and any unique pin-out configuration that may be required. This information
should be given to your dealer or distributor to determine the correct cable for your use.
Attach one end of the cable to the proper connector on the printer and the other end to the
host computer. Secure the interface cable to the connector with the screws or wire clips
provided.
WARNING
BEFORE CONNECTING THE CABLE,
MAKE CERTAIN BOTH THE HOST
COMPUTER AND THE PRINTER ARE
POWERED OFF.
User's Guide
1-21