ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT SIDE OF CABINET
Pr
ar
CAUTION:
Be sure not to pull or damage the
electrical wires inside the dryer when inserting the duct.
N
PE
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
CAUTION:
Internal duct joints
must be secured with
tape, otherwise they
may separate and cause
a safety hazard.
Installation Instructions
CAUTION:
Use 4" rigid metal ducting only
inside the dryer. Internal duct
joints must be secured with
tape, otherwise they may sepa-
rate and cause a safety hazard.
re
ADDING COVER PLATE TO REAR OF
CABINET (SIDES AND BOTTOM EXHAUST)
Connect standard metal elbows and ducts to complete
the exhaust system. Cover back opening with a plate (Kit
WE1M454) available from your local service provider. Place
PE
WARNING
NEVER LEAVE THE BACK OPENING
WITHOUT THE PLATE.
10
PL ATE
(KIT WE1M454)