Usbeth Command; Users Command - Lenovo RD220 - ThinkServer - 3798 User Manual

ok
system> timeouts
-o 2.5
-l 3.5

usbeth command

Syntax
usbeth [options]
options:
-en <enabled|disabled>
Description
Use the usbeth command to enable or disable the in-band LAN over USB
interface. For more information about enabling or disabling this interface, see
"Disabling the USB in-band interface" on page 19.
Example
system>usbeth
-en : disabled
system>usbeth -en enabled
ok
system>usbeth
-en : disabled

users command

Syntax
users [options]
options:
-user number
-n username
-p password
-a authority level
Description
Use the users command to access all user accounts and their authority levels and
to create new user accounts and modify existing accounts.
Read the following guidelines about the users command:
v User numbers must be from 1 to 12, inclusive.
v User names must be less than 16 characters and can contain only numbers,
v Passwords must be more than 5 and fewer than 16 characters long and must
v The authority level can be one of the following levels:
90
Integrated Management Module: User Guide
letters, periods, and underscores.
contain at least one alphabetic and one nonalphabetic character.
– super (supervisor)
– ro (read only)
– Any combination of the following values, separated by |:
am (User account management access)
rca (Remote console access)
rcvma (Remote console and virtual media access)
pr (Remote server power/restart access)
cel (Ability to clear event logs)
bc (Adapter configuration [basic])