Ldap Command - Lenovo RD220 - ThinkServer - 3798 User Manual

-g 0.0.0.0
-s 255.255.255.0
-n IMMA00096B9E003A
-r auto
-d auto
-m 1500
-b 00:09:6B:9E:00:3A
-l 00:00:00:00:00:00
system> ifconfig eth0 -c static -i 192.168.70.133
These configuration changes will become active after the next reset of the IMM.
system>
Note: The -b option in the ifconfig display is for the burned-in MAC address. The

ldap command

Syntax
ldap [options]
options:
Description
Use the ldap command to display and configure the LDAP protocol configuration
parameters.
The following table shows the arguments for the options.
84
Integrated Management Module: User Guide
burned-in MAC address is read-only and is not configurable.
-a loc|ldap|locId|Idloc
-b anon|client|login
-c client_dn
-d search_domain
-f group_filter
-g group_search_attr
-l string
-m login|cfg|lthenc
-n service_name
-p client_pw
-pc confirm_pw
-r root_dn
-s1ip host name/ip_addr
-s2ip host name/ip_addr
-s3ip host name/ip_addr
-s1pn port_number
-s2pn port_number
-s3pn port_number
-u search_attrib
-v off|on
-w on|off
-h
Option Description
-a User authentication
method
-b Binding method
-c Client distinguished
name
-d Search domain
-f Group filter
-g Group search attribute String of up to 63 characters for group_search_attr
Values
Local only, LDAP only, local first then LDAP, LDAP
first then local
Anonymous, bind with ClientDN and password, user
principal bind (UPN)
String of up to 63 characters for client_dn
String of up to 31 characters for search_domain
String of up to 63 characters for group_filter