Passwordcfg Command - Lenovo RD220 - ThinkServer - 3798 User Manual

The following table shows the arguments for the options.
Example
system> ntp
-en: disabled
-f: 3 minutes
-i: not set

passwordcfg command

Syntax
passwordcfg [options]
options: {-high}|{-legacy}|{-exp|-cnt|-nul}
-legacy
-high
-exp:
-cnt:
-nul:
-h
Description
Use the passwordcfg command to display and configure the password parameters.
Example
system> passwordcfg
Security Level: Legacy
system> passwordcfg -exp 365
ok
system> passwordcfg -nul yes
ok
system> passwordcfg -cnt 5
86
Integrated Management Module: User Guide
Option Description
-en Enables or disables the
Network Time Protocol
-i Name or IP address of the
Network Time Protocol
server
-f The frequency (in minutes)
that the IMMclock is
synchronized with the
Network Time Protocol
server
-synch Requests an immediate
synchronization with the
Network Time Protocol
server
Option Description
-legacy Sets account security to a predefined legacy set of defaults
-high Sets account security to a predefined high set of defaults
-exp Maximum password age (0 - 365 days). Set to 0 for no expiration.
-cnt Number of previous passwords that cannot be reused (0 - 5)
-nul Allows accounts with no password (yes | no)
-h Displays the command usage and options
Values
Enabled, disabled
The name of the NTP server to be used
for clock synchronization.
3 - 1440 minutes
No values are used with this parameter.