Server Controls, Leds, And Power; Front View - IBM 8486 - eServer xSeries 100 User Manual

Server controls, LEDs, and power

This section describes the controls and light-emitting diodes (LEDs) and how to turn
the server on and off.

Front view

The following illustration shows the controls and LEDs on the front of the server.
CD or DVD-eject button
CD or DVD drive activity LED
USB connectors
System-error LED
(Optional) Diskette-eject button
Hard disk drive activity LED
(Optional) Diskette drive activity LED
Power-control button
8
xSeries 100 Type 8486: User's Guide
Power-on LED
Power-control
button
(Optional) Diskette drive
activity LED
Press this button to release a CD or DVD from the CD or DVD drive.
When this LED is lit, it indicates that the CD or DVD drive is in use.
Connect a USB device to these connectors.
When this amber LED is lit, it indicates that a system error has occurred. A
LED on the system board might also be lit to help isolate the error.
Press this button to release a diskette from the diskette drive.
When this LED is flashing, it indicates that the hard disk drive is in use.
When this LED is lit, it indicates that the diskette drive is in use.
Press this button to turn the server on and off manually. A
power-control-button shield comes with the server.
CD or DVD eject
button
CD or DVD drive
activity LED
USB (2)
System error LED
(Optional) Diskette-eject
button
Hard disk drive
activity LED