Bosch FSM-2000 Installation Manual page 15

Fire Monitoring System
3 Start the Fire Monitoring System
Starting the server
After successful configuration, start the server.
Logging on to the client
NOTICE!
i
The first log-on to the client can take a while, as the required
software components are being loaded.
Finally, perform the following steps to log on to the client:
1.
2.
3.
4.
Bosch Security Systems
To do this, click the Start button in the System start/stop
tab. The server is started when the status display lights up
green and all operators are displayed.
Open Internet Explorer.
Enter the address according to the following pattern:
http:\\server name (see
window appears.
Enter Administrator as the user name and password.
Start with your desired operations.
Installation Guide
Start the Fire Monitoring System | en
F.01U.032.785 | A3 | 2007.05
15
). A log-on