BMW K 1300 S Rider's Manual page 77

Phase 2
Consult the troubleshooting
chart if the engine refuses to
start. ( 136)
Pre-ride check
The instrument cluster runs a
If the 'General' warning light does
test of the 'General' warning light
not show:
when the ignition is switched on:
this is the "Pre-Ride-Check" In
the process, the warning light
al' warning light cannot be dis-
first lights up red and then yellow
played.
to test its function. The test is
Check that the 'General' warning
aborted if you start the engine
light comes on, and that it shows
before it completes.
red and yellow.
To initialize, the exhaust flap is
completely opened once then
closed again.
Phase 1
General warning light shows
red.
ABS self-diagnosis
CHECK!
is indicated.
The readiness for operation of
the BMW Motorrad Integral ABS
is checked by the self-diagnosis.
Self-diagnosis is performed au-
tomatically when you switch on
the ignition. To check the wheel
General warning light shows
sensors, the motorcycle must
yellow.
drive faster than 3 mph (5 km/h).
CHECK!
is indicated.
Phase 1
Checking the diagnosable
system components while
Some malfunctions cannot
stopped.
be indicated if the 'Gener-
light.
Phase 2
Have the malfunction corrected
as soon as possible by a spe-
Checking the wheel sensors
cialized workshop, preferably
while starting off.
an authorized BMW Motorrad
retailer.
light.
5
73
ABS warning light flashes.
z
Possible country-specif-
ic version of ABS warning
ABS warning light flashes.
Possible country-specif-
ic version of ABS warning