BMW K 1300 S Rider's Manual page 118

8
114
First turn the end muffler
downward slightly and then
outward.
z
Engage first gear.
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
chassis control systems ABS
and ASC at the beginning of this
chapter.
Remove five screws 1 on rear torque can work loose or their
wheel, holding wheel as you do threads can suffer damage.
so. Always have the tightening
When using the BMW Motor- torques checked by a specialized
rad rear wheel stand: remove workshop, preferably an
the lock washer. authorized BMW Motorrad
Lower rear wheel to the ground retailer.
and roll out toward rear.
When using the BMW Motor-
rad rear wheel stand: remount
the lock washer.
Installing rear wheel
Malfunctions may occur
during control interventions
by ABS and ASC if a wheel other
Threaded fasteners not
tightened to the specified
When using the BMW Motor-
rad rear wheel stand: remove
the lock washer.
Roll and mount rear wheel onto
rear wheel support.
When using the BMW Motor-
rad rear wheel stand: remount
the lock washer.