Tires - BMW K 1300 S Rider's Manual

adjustment is completed, the
display is automatically hidden
again.
Setting loading state
Start engine.
The loading state cannot
be set while driving.

Tires

Checking tire pressure
ing characteristics of the motor-
cycle and reduces the life of the

tires.

Press button 1.
Ensure proper tire inflation
Current setting is displayed.
pressure.
Press and hold button 1 until
display changes each time.
Starting from the current state,
the display is in the following or- dicular to the wheel rim have a
der:
One-up tendency to open as a result of
centrifugal force.
In order to avoid a sudden loss of
One-up with luggage
tire inflation pressure, fit a valve
cap with rubber sealing ring to
Two-up (with luggage) the rear tire and make sure that
the cap is screwed on firmly.
Make sure ground is level and
If no further changes are made,
firm and park motorcycle.
the loading state is set as indi-
Check tire pressures against
cated.
data below.
Incorrect tire inflation pres-
36.3 psi (2.5 bar) (Single rid-
sure results in poorer hand-
er, with cold tire)
36.3 psi (2.5 bar) (Driver with
passenger and/or load, with
cold tire)
At high road speeds, tire
valves installed perpen-
42.1 psi (2.9 bar) (Single rid-
er, with cold tire)
4
65
z
Tire pressure, front
Tire pressure, rear