Station Title Search Function; Quick Search Function; Rds; Setting Rds Reception Mode And Receiving Rds Stations - Alpine CDA-9811R Owner's Manual

Alpine fm/mw/lw/rds cd receiver owner's manual cda-9815rb, cda-9813r, cda-9812rb, cda-9812rr, cda-9811r
Hide thumbs Also See for CDA-9811R:
Table of Contents

Advertisement

Station Title Search Function

If titles for radio stations are entered, you can search for a radio
station from its title.
.
1
Press SEARCH
in Radio mode to switch to Title
Search mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to receive the
frequency of the selected title.
• Search mode in Title Search mode is canceled by pressing and
holding SEARCH
for at least 2 seconds.
• If a station has no title, "NO TITLE" is displayed for 2 seconds.

Quick Search Function

You can search for a radio station by its frequency.
1
Press and hold SEARCH
in Radio mode to activate Quick Search mode.
2
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
3
Press the Rotary encoder to receive the selected
frequency.
• Search mode in Quick Search mode is canceled by pressing and
holding SEARCH
for at least 2 seconds.
for at least 2 seconds

RDS

BAND/
TEL.
TITLE
g f
T.INFO
F/SETUP
Setting RDS Reception Mode and Receiving
RDS Stations
The RDS (Radio Data System) is a radio information system using
the 57 kHz subcarrier of regular FM broadcast. The RDS allows you
to receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press F/SETUP so that the "FUNC" indicator (only
the underlined portion of the "FUNC" indicator for
CDA-9811R) lights up.
2
Press 1/AF to activate the RDS mode.
3
Press g or f to tune in the desired RDS
station.
4
Press 1/AF again to deactivate the RDS mode.
5
Press F/SETUP to activate the normal mode.
The "FUNC" indicator (only the underlined portion
of the "FUNC" indicator for CDA-9811R) goes out.
• When the unit receives the PTY31 (Emergency Broadcast)
signal, the unit will show "ALARM" in the display
automatically.
The RDS digital data includes the following:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
1/AF
2/P.PTY
3/PTY
9
-EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cda-9812rbCda-9812rrCda-9813rCda-9815rb

Table of Contents