Advertisement
Tutorial
Install the battery and charge it for 4-5 hours. Select the corresponding material guide setting to match the
width of the label you are using (i.e. ½", 1", or 1-1/2).
Insert the labels onto the roll holder and place in the label holding area.
Turn the unit on and with the arrow keys select the appropriate size code. This information can be obtained
from the inside of the label core and on the outside of the box.
Insert the labels into the material guides and press the feed key.
Select the size text (small or large) to be printed and the format required.
Press Print for one label or Shift and Print for multiple labels.
IMPORTANT - When removing the labels from the ID Pro it is imperative that the material guide pins are pushed
down while removing the labels
Serialization
Alpha and numeric characters can be serialized on the I.D. PRO Plus. Put the cursor under the character to be
serialized. Press Shift & the Serial key. Enter number of times the data is to increment and press Print. When
the serialized character reaches 9 or Z the character to it's left is incremented and the original number becomes a 0
or an A. (i.e. 099 becomes 100). Alpha and/or numberic serialization is possible.
Page 7
Advertisement
