Setting The Room Code; Performing A System Reset - Bose Wave Music System Owner's Manual

Setting the room code

Alarm
Time
Menu
Tune/MP3
Time
Alarm
Time
Menu

Performing a system reset

Alarm
Time
Menu
Tune/MP3
Time
Alarm
Time
Menu
Your Wave ® music system comes from the factory ready to operate as a second room (room
code B) when connected to a Bose
Wave ® music system with your Lifestyle
change the room code to match that of the remote control you are using for that room.
®
Refer to your Lifestyle system owner's guide for more information on room codes.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
>
2. Press Tune/MP3 six times until ROOM- B
the room letter indicate how the microswitches should be set on the Lifestyle
control.
3. Press Time – or Time + to select a room code other than room B.
4. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu
to end automatically.
If you wish, you can restore your Wave
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
>
2. Press Tune/MP3 seven times until RESET ALL- NO is displayed.
3. Press Time – or Time + to change RESET ALL- NO to RESET ALL- YES.
4. When PRESS 2 TO CONFIRM appears on the display, press Presets button 2. When
the reset is complete, DEFAULTS RESET is displayed.
5. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu
to end automatically.
Personalizing Your Wave
®
link enabled Lifestyle
® system beyond a second room you will need to
® music system to the original factory settings.
®
Music System
®
system. If you want to use your
is displayed. The dashes following
®
remote
23