Default Settings - 3Com 3C17709 Getting Started Manual

20 C 1: I
HAPTER NTRODUCING THE

Default Settings

3C S 4050
OM WITCH
Table 5 shows the default settings for the 3Com Switch 4050 and 4060.
If you initialize one of the Switch units, it is returned to these defaults.
Table 5 Default Settings
Feature
Port Status
Port Speed
Duplex Mode
Flow Control
Broadcast Storm Control
Virtual LANs (VLANs)
Multicast Filtering
Rapid Spanning Tree Protocol
Link Aggregation Control
Protocol (LACP)
Spanning Tree Protocol
Smart Auto-sensing
IP Address
Subnet Mask
* This default IP address is used if the unit is operating in standalone mode, and/or no other
Switches on the network have this IP address. If this default IP address is already in use then the
Switch detects this and configures itself with an IP address in the range 169.254.1.0 to
169.254.254.255.
4060
AND
3Com Switch 4050/4060
Enabled
Auto-negotiated
Auto-negotiated
Auto-negotiated
Enabled
High threshold: 3000 broadcast frames per
second — Notify and filter
Low threshold: 1500 broadcast frames per
second — Notify and unfilter
All ports belong to the untagged Default VLAN
(VLAN 1)
IGMP filtering enabled
Enabled
Enabled
Enabled
Enabled
169.254.100.100
255.255.0.0
*