Advertisement
12. To confirm the setting, press the key:
The fax machine starts transmitting and the message
"TRANSMITTING" appears on display.
If the transmission has been completed successfully, at
the end the message "TX COMPLETED" appears on
display for a few seconds.
Otherwise, if the transmission has not been completed
successfully, at the end on the display appears the mes-
sage "TX ERROR" for a few seconds followed by an
acoustic signal and error led "
In both cases, at the end of the transmission, the display
shows:
13. To see the other available option, press the keys:
The display shows:
14. To confirm the setting, press the key:
15. To remove the message from the display and to switch
off error led "
", press the key:
If you have chosen "SAVE SMS: YES", the message "SAVED"
appears on display for a few seconds and your message will
be saved on the list of messages sent "SMS SENT". At this
point you can always send it again or change it.
If the message "MEMORY FULL", "DELETE SENT SMS" ap-
pears on display and the fax machine does not allow you to
write the text of your message, this means that the memory for
messages sent is full. At this point, delete at least one of the
messages from the memory. Later on see "To delete/edit/
send again a message (SMS)".
If a power failure occurs, the fax machine will keep all the
messages in the memory.
" lights on.
If the message "MEMORY FULL", "DEL. WRITTEN SMS"
appears on display and the fax machine does not allow you
to write your message, this means that the memory for writ-
ten and saved messages is full. At this point, delete at least
one of the messages from the memory. Later on see "To
delete/edit/send again a message (SMS)".
T
(
O SAVE A MESSAGE
SENDING IT
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Write the text of the message (max. 160 characters) as
described in "To write and send a message (SMS)".
5. To confirm the setting, press the key:
The message "SAVED" appears on display for a few
seconds. The message will be saved on the list of writ-
ten messages "SMS WRITTEN".
6. To return the fax machine to its initial stand-by mode,
press the key:
)
SMS
WITHOUT
3
Advertisement
