Playback - Alpine 3DA-W882E Owner's Manual

1
1
SOURCE
DEMO
TUNER TAPE 3D
2
10
3
OPEN
O/C
CLOSE
Cassette Player
Operation

Playback

When a tape cassette is inserted with the
movable display opened, the display closes
automatically and the playback starts.
When a cassette is already inserted, press the
SOURCE button to select the TAPE mode. The
mode will change each time the button is
pressed.
(*Only with a CD Shuttle connected.)
*
CD SHUTTLE
Press the 0
PAUSE
playback.
Press again to resume tape playback.
TAPE
Pressing the O/C button stops the playback and
ejects the cassette. The movable display will
open automatically.
Notes:
• Make sure the cassette tape is fully inserted
into the mechanism before pressing the O/C
button to close the movable display.
• After a cassette tape is inserted, the tape
bias is automatically set. For high bias tapes
(metal, CrO
3
1
2
button to pause the tape
, etc.) MTL will be displayed.
2
English
41