Manual Storing Of Station Presets - Alpine 3DA-W882E Owner's Manual

1
1
1 2 3
Radio Operation
Manual Storing of Station
Presets
1. Tune in the desired radio station you wish to
store in the preset memory.
2. Press and hold any one of the preset
buttons ( 1
seconds. The frequency display will begin
to blink.
4 5 6
3. Press the preset button into which you wish
to store the station while the display is
blinking (within 5 seconds).
The display stops blinking once the station
has been memorized. The display shows the
band, preset No. with a triangle (
station frequency memorized.
4. Repeat the procedure to store 5 other
stations onto the same band.
To use this procedure for other bands,
simply select the band desired and follow
steps 1 – 3 above.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM and D.A.P.).
Note: If you store a station in a preset memory
through 6 ) for at least 2
which already has a station, the current
station will be cleared and replaced with
the new station.
English
) and the
17