Residual Heat And Ventilation - Mercedes-Benz ML350 Operator's Manual

M-class
Hide thumbs Also See for ML350:
Table of Contents

Advertisement

Controls in detail
3-zone automatic climate control*
Deactivating
It is possible to deactivate the air condi-
tioning (cooling) function of the automatic
climate control system. The air in the vehi-
cle will then no longer be cooled or dehu-
midified.
Press button 2 ( page 218).
The indicator lamp on button 2
goes out.
The cooling function switches off after
a short delay.
226
Activating
Moist air can fog up the windows. You can
dehumidify the air with the air condition-
ing.
Press button 2 again.
The indicator lamp on button 2
comes on.
The air conditioning system uses the refrig-
erant R-134a. This refrigerant is free of
CFCs which are harmful to the ozone layer.
!
If the air conditioning cannot be turned
on again, this indicates that the air
conditioning is losing refrigerant. The
compressor has turned itself off.
Have the air conditioning checked at
the nearest authorized Mercedes-Benz
Light Truck Center.

Residual heat and ventilation

With the engine switched off, it is possible
to continue to heat or ventilate the interior
for up to 30 minutes. This feature makes
use of the residual heat produced by the
engine.
i
How long the system will provide heat-
ing depends on the coolant tempera-
ture and the battery voltage.
Regardless of the temperature and air
volume set on the climate control panel
an interior temperature is aimed at by
72°F (22°C) and the blower runs for
the protection of the battery on low
stage.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml500

Table of Contents