Mercedes-Benz ML350 Operator's Manual page 132

Raising:
Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button in direction of ar-
row and pull the head restraint out.
Lowering:
To lower the head restraint, push
release button in direction of arrow and
press down on the head restraint.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
ble.
For more information on seats, see the
"Getting started" section ( page 38).
Controls in detail
Removing and installing rear seat head
restraints
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
Seats
G
131