Mercedes-Benz ML350 Operator's Manual page 172

Vehicle submenu
Access the Vehicle submenu via the
Settings... menu. Use the Vehicle
menu to make general vehicle settings.
The following functions are available:
Function
Adjusting compass zone
Calibrating compass
Display when ignition is
switched off
Set automatic locking
Limiting opening height of tail-
gate*
Adjusting compass zone
This function is not available if your vehicle
sub- is equipped with the Modular COMAND
System and navigation module*.
Use this function to set the compass zone.
Page
To set the compass zone:
171
Move the selection marker to the
submenu using the æ
171 Vehicle
or ç button.
172
Press button j or k repeatedly
until you see this message in the dis-
172
play: Compass Adjustment Zone
173
The selection marker is on the current
setting.
Press button æ or ç to set the
respective compass zone.
Controls in detail
Control system
For information on how to select the prop-
er geographic zone, see "Compass"
( page 295).
Calibrating compass
This function is not available if your vehicle
is equipped with the Modular COMAND
System and navigation module*.
Use this function to calibrate the compass
zone.
To calibrate the compass:
Move the selection marker to the
.
submenu using the æ
Vehicle
or ç button.
Press button j or k repeatedly
until you see this message in the dis-
play: Compass Calibration
The selection marker is on the current
setting.
.
171