Recommended Shift Speeds; Reverse - Mazda Tribute Owner's Manual

Driving
2. Press the clutch pedal to the
floor, then put the gearshift
lever in the neutral position.
3. Start the engine.
4. Press the brake pedal and move
the gearshift lever to the
desired gear; 1 (First) or R

(Reverse).

5. Release the parking brake, then slowly release the clutch pedal while
slowly pressing on the accelerator.
During each shift, the clutch pedal must be fully pressed to the floor.
Make sure the floor mat is properly positioned so it doesn't interfere with
the full extension of the clutch pedal.
Failure to fully press the clutch pedal to the floor may cause
increased shift efforts, prematurely wear transmission
components or damage the transmission.
Do not drive with your foot resting on the clutch pedal or use the
clutch pedal to hold your vehicle at a standstill while waiting on a
hill. These actions will severely reduce the life of the clutch and
could nullify a clutch warranty claim.

Recommended shift speeds

Upshift according to the following charts for best fuel economy:
Upshifts during light to moderate accelerations and cruises (for
1-2
2-3
3-4
4-5
Reverse
Make sure that your vehicle is at a complete stop before you shift
into R (Reverse). Failure to do so may damage the transmission.
208
best fuel economy)
Shift from:
10 mph (16 km/h)
20 mph (32 km/h)
32 mph (52 km/h)
37 mph (60 km/h)