Access Point Profiles - NETGEAR WNA1000 - Wireless-N 150 USB Adapter User Manual

Access Point Profiles

To set up a profile:
1. Click the icon to open the Smart Wizard. The Settings tab displays:
Figure 2-7
2. Enter the network settings.
a. In the Network Type section, make sure that Access Point (Infrastructure) is selected.
b. In the Profile field, type a name for the profile.
c. In the Network Name (SSID) field, select a network or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly the SSID used by the access point.
3. Click Save Profile.
All the configuration settings are saved in this profile.
4. To use the profile, click Apply.
5. Verify wireless connectivity to your network.
NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual
v1.0, August 2009
2-9