Table of Contents
Advertisement
NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual
•
The computer with the wireless-N USB adapter must be running Windows 2000, XP, or Vista
(32/64 bits).
Notes: If you connect using WPS and later lose the settings, they can be restored by
reconnecting using the WPS procedures described in this section.
To connect the wireless-N USB adapter to an access point or router that supports WPS, there are
several methods:
•
Starting with the adapter, do one of the following:
–
Connect during initial installation. See the NETGEAR Wireless-N 150 USB Adapter
WNA1000 Installation Guide, provided in the package and on the Resource CD.
–
Click the Join a Network button on the Smart Wizard Settings screen (see
Status Bar" on page
–
Click an access point or router that supports WPS in the Networks tab (see
Wireless Networks in Your Area" on page
•
Starting with the router or access point. Log in to the router or access point, then follow the
router or access point's prompts to connect a WPS client.
You can use either a push button or PIN entry to connect using WPS:
•
Push Button Configuration. Press a push button or push dome on the access point or router,
or click an on-screen button in the software. This is a fairly new technology, so not all access
points and routers provide a push button. See
Wireless Access Point or Router" on page
•
PIN entry. Use the router or access point's Personal Identification number (PIN), or use the
wireless-N USB adapter's PIN. See
or Router" on page
2-4
1-9).
"Generating a PIN to Connect to a Wireless Access Point
2-6.
v1.0, August 2009
2-1).
"Using a WPS Push Button to Connect to a
2-5.
"Smart Wizard
"Viewing
Advertisement
Table of Contents
