Belkin F5D8236TT4 User Manual page 81

TRoUblesHooTINg
sections
table of contents
I can't connect to the Internet wirelessly�
If you are unable to connect to the Internet from a wireless computer,
please check the following items:
1�
Make sure the LEDs on the front panel are as below:
• The "router" LED should be on.
• The "modem" LED should be on, and not blinking.
• The "internet" LED should be on, and not blinking.
• The "wireless" LED should be on, not blinking.
2� Open your wireless utility software by clicking on the icon in the
system tray at the bottom, right-hand corner of the screen.
3� The exact window that opens will vary depending on the model of
wireless card you have; however, any of the utilities should have
a list of "Available Networks"—those wireless networks it can
connect to.
does the name of your wireless network appear in the results?
Yes, my network name is listed—go to the troubleshooting solution
titled "I can't connect to the Internet wirelessly, but my network name
is listed".
No, my network name is not listed—go to the troubleshooting solution
titled "I can't connect to the Internet wirelessly, and my network name
is not listed".
N Wireless Router
1 2 3 4 5 6
I can't connect to the Internet wirelessly, but my network name
is listed�
If the name of your network is listed in the "Available Networks" list,
please follow the steps below to connect wirelessly:
1� Click on the correct network name in the "Available Networks" list.
2�
If the network has security (encryption) enabled, you will need to
enter the network key. For more information regarding security,
see the section entitled "Changing the Wireless Security Settings".
3� Within a few seconds, the tray icon in the lower, left-hand corner
of your screen should turn green, indication of a successful
connection to the network.
79
7 8 9 10