Table of Contents
Advertisement
Available languages
Available languages
1
Turn on your TV. Select the channel number for the DVD
Recorder (Audio/Video In or channel 3 or 4).
2
With the Recorder on, press TIMER on the remote control.
3
Select '
C .
The information will be displayed.
4
Select a field with D or C .
5
Enter information with B , A or the number buttons 0..9 .
For '
', you first enter the month and then the day.
In '
' use SELECT to select from the following options:
: Repeated daily recordings from Monday to Friday
: Repeated weekly recordings (every week on the same day, e.g.
Monday).
You can also program recordings from external sources connected to
S-VIDEO (Y/C) ,
VIDEO Y PB PR ('
Use the SELECT button to select '
'
'.
Select the '
Use B or A to select the recording mode.
6
If all information is correct, press the
information is stored in a TIMER block.
7
To end, press TIMER .
The disc you have inserted will be checked.
8
Find the position on the disc where the recording should begin.
9
Switch off the Recorder with STANDBY m .
The programmed recording will only function properly when the
DVD
Recorder
STANDBY m button.
If any of the TIMER blocks are in use, '
' using B or A and confirm with
VIDEO (CVBS) ('
') or
').
' or '
' in the fields '
' field using C .
OK button. The
has
been
' will light up on the display.
COMPONENT
' and
using
the
Programming a recording (TIMER)
Advertisement
Table of Contents
